The RPI-3000A is designed to inhibit the mineral scale formation inside Reverse Osmosis systems, particularly with difficult Brackish feed water. The RPI-3000A is highly effective against Calcium Sulphate, Calcium&Magnesium Carbonate and Calcium Fluoride scaling.

RPI-3000A has the Dual Strength to inhibit the crystal growth mechanism and to disperse the tiny oxide and micro-crystal particles


RPI-3000A is approved for use with cellulose acetate and polyamide membranes. The required dosage level ranges from 1 – 10 ppm as delivered. The dosage is proportional to the feed water flow. RPI-3000A can be used in its commercial form or diluted with pure water in any ratio. A maximum dilution ration of 1 to 10 must be respected. Diluted preparations must be rapidly consumed, within 24 hours ideally. RPI-3000A is easy to use, safe to handle and safe to store for several months.

Physical Properties

Appearance: clear, dark yellow liquid

Density: 1.14 – 1.17 g/cm3

pH value: 4.8 – 5.3

Boiling point / boiling range: 100°C – 105°C

Freezing Point: -10°C

Solubility in water: unlimited

Storage & Handling

RPI-3000A is safe to use and thus is not classified as a hazardous chemical (GGVE/GGVS, ICOA/IATA). Standard regulations and precautions when dealing with chemical products have to be followed.
The storage temperature should be between +5°C and 30°C. The product is supplied in containers suitable for air, road or sea transportation. Additional information is available inside the safety data sheets.


Polyethylene canister (PE) 23.5 kg net
Standard drum (PE) 240 kg net
IBC Container (PE) 1.100 kg net

Safety Data Sheet


Technical Description