RPI-3000C

RPI-3000C is specially designed to inhibit the scale formation inside Reverse Osmosis desalination systems, particularly with difficult Brackish feed water. RPI-3000C is highly effective against Calcium Sulphate, Calcium&Magnesium Carbonate or Calcium Fluoride.

RPI-3000C has the Dual Strength to inhibit the crystal growth mechanism and to disperse the tiny oxide particles. A further advantage is the superior stabilization and inhibition of the manganese (IV) oxidation properties.

Application

RPI-3000C is the highest concentration version of the 3000A. It is approved for use with cellulose acetate and polyamide membranes. The required dosage level ranges from 1 – 4 ppm as delivered. The dosage is proportional to the feed water flow. RPI-3000C can be used in its concentrated form or diluted with pure water in any ratio. Diluted preparations must be ideally used rapidly, within 48-72 hours after preparation. RPI-3000C is easy to use, safe to handle and safe to store for several months.

Physical Properties

Appearance: clear, dark yellow liquid

Density: 1.14 – 1.17 g/cm3

pH value: 4.8 – 5.3

Boiling point / boiling range: 100°C – 105°C

Freezing Point: -10°C

Solubility in water: unlimited

Storage & Handling

RPI-3000C is safe to use and thus is not classified as a hazardous chemical (GGVE/GGVS, ICOA/IATA). Standard regulations and precautions when dealing with chemical products have to be followed.
The storage temperature should be between +5°C and 30°C. The product is supplied in containers suitable for air, road or sea transportation. Given the high concentration in active substances of RPI-3000C, it is recommended not to overdose it. Additional information is available inside the safety data sheets.
 

Packaging

Polyethylene canister (PE) 23.5 kg net
Standard drum (PE) 240 kg net
IBC Container (PE) 1,100 kg net

Safety Data Sheet

Download

Technical Description

Download